VersaGard™ Two-Pipe Snow Guard System for Trapezoidal, Face-Attached Metal Roofs
VersaGard Is Available for your Exposed-Fastened Roofs
VersaGard Benefits:
- With factory-applied, butyl sealant already in the base, the VersaGard bracket offers a long-term service life free from UV degradation, drying and cracking.
- Multiple Applications: VersaGard is named as such because it offers solutions for both snow retention and PV installation on exposed-fastened metal roofs.
- Snow Retention: Choose VersaGard if you are searching for a two-pipe, snow guard system on trapezoidal, exposed- fastened metal roofing. Reduce the risks associated with rooftop avalanches and reduce the need for snow removal maintenance.
Note: When used with snow retention, VersaGard is the product of choice when rib height is 1.0" or below.
When rib height exceeds 1.5," use VersaGard V for rib heights up to 2.0". - Mounted in the flat of the panel into the supporting structure of the roof (or deck) with tested holding capacity
- Can be color-finished (anodized or powder-coated) to match the roof
VersaGard Features:
- One-inch, two-pipe, snow guard system
- 100% aluminum and stainless; outlasts the roof itself
- Up to six points of attachment
- Gasketed fasteners sold separately according to substrate type
For layout and design guidance including complete project cost please
contact Robert Casey at 413-592-0404 or email at rcasey@sno-safe.com
S-5!® VERSAGARD COMPONENTS
S-5! VersaGard Bracket
More Info- Circular holes in bracket support 1 inch pipes.
- Diagonal slot offers flexible support for PV installations.
S-5! VersaGard V
More Info- For rib heights greater than 1.5 inches up to 2.0 inches.
- Location of lower hole in bracket is higher.
- No slot; not for use with solar PV applications
S-5! DualPipe®for VersaGard
More Info- 1 inch diameter 6,000 series aluminum pipe crossmember with ⅛ inch wall
- DualPipe comes with DualGard Splice
- Installs in 8 foot lengths
S-5! DualClip II® for VersaGard
More Info- For seam heights up to 1-1/2 inches
- Retards migration of snow and ice beneath crossmembers
- Optional with user discretion but recommended on seam heights of 2 inch and greater
- For panel widths of 24" or less, (1) DualClip is suggested per panel, for panel widths of more than 24", (2) DualClips are suggested per panel.
- DualClip is assembled to crossmember during or following system installation.
S-5! DualClip III® for VersaGard
More Info- For seam heights of greater than 1-1/2 inches
- Retards migration of snow and ice beneath crossmembers
- Optional with user discretion but recommended on seam heights of 2 inch and greater
- For panel widths of 24" or less, (1) DualClip is suggested per panel, for panel widths of more than 24", (2) DualClips are suggested per panel.
- DualClip is assembled to crossmember during or following system installation.
S-5! DualCollar® & Endcap for Versagard
- DualCollar is installed on DualPipe at the ends of an assembly, locking DualPipe in place to prevent lateral shifting.
- Endcaps keep rain, dirt or debris out of the pipes.
- Sold as set of (4) four endcaps and collars
S-5! Metal-to-Metal Screw
More Info- ¼-14 Self Drilling Screw - 1-½ inch to 2-½ inch Length
- ⅜ inch Hex Washer Head - Zinc/Aluminum Cap
S-5! Metal-to-Wood Screw
More Info- ¼-14 Type 17- AB Milled Point - 1-½ inch to 2-½ inch Length
- ⅜ inch Hex Washer Head - Zinc/Aluminum Cap
