S-5! Standing Seam Metal Roof Clamps
Mount a variety of rooftop accessories with zero penetration to your roof
Sno-Safe Snow Guards is an official distributor of all S-5!® products
For layout and design guidance including complete project cost please
contact Robert Casey at 413-592-0404 or email at rcasey@sno-safe.com
- Brass clamps designed for double-folded, copper standing seam roofing
- Metallurgical compatibility with copper
- Preserves aesthetics of the copper roof
- Designed for double-folded,standing seam roofs popular in Europe and the world over
- Comparable strength to S-5-U, but at a lower cost
- Fits Butler’s MR-24® and other double-folded, standing seam roofs
- Unique flange design increases ease and versatility of attachment to bottom-mount PV rails and other nut and bolt connections
- Specifically designed for doublefold, standing seams popular in Europe and the world over, including Butler MR-24
- Designed to accommodate roof panels with horizontal seams not fully closed with side securement
- Unique two-piece design allows attachment anywhere along the length of the seam
- Insert allows clamp to fit over wider horizontal seams for fast and easy installation
- Designed for standing seam panels with horizontal, single
- Secure and cost-effective solution for horizontal seam dimensions ≥ 0.65”(16.5 mm)
- Fits all seams the that S-5-U fits horizontally and more cost effective
- Fits Steel & Tube Hi-Rib and Legacy profiles, with unmatched holding strength
- Attaches a wide range of rooftop ancillaries
- Pairs easily with PVKIT for rail-less solar mounting
- Developed to fit Klip-Rib®, KlipLok® and other bulbous type snap-together profiles
- Design utilizes multiple inserts (sold separately) to accommodate various rib dimensions
- Mounting bolt directly over center of seam
- Special design for “nail-flange” SSR profiles ≤ 1” (25 mm) in height
- Angled setscrews for easier installation
- Fits seam profiles having base of rib dimension less than .82 inches (20 mm)
- Clamp insert facilitates best fit without damage to panel seam
- New design ensures straight clamp position on seam
- Designed for use on popular 1.5” (38 mm) nail strip metal roof profiles
- Angled wall with nose permits the clamp to engage the triangle-type profiles during the installation process
- Wider throat accommodates most nail strip profiles; no need to crimp
- Nail strip profiles horizontal base rib dimension ≤ 0.800”
- Hinge forms to shape of seam preventing damage at the point of attachment
- Reversible hinge for wide & medium-width profiles
- Accommodates metal roof panels with a wide variety of profiles, including large, round “bulb” seam configurations up to 1.14” (29 mm) in diameter
- Also fits smaller bulb-shaped profiles when seamed incorrectly, allowing seam to be utilized without correction
- Designed specifically to fit the Zambelli RIB-ROOF 465, McElroy Metal Mirage II, Rib Roof Metal Systems Rib Roof and similar roof profiles
- Unique design with opposing setscrews that engage the ribs beneath the top bulb, maximizing published holding strength
- Fits Riverclack profiles, with unmatched holding strength
- Attaches a wide range of rooftop ancillaries
- Pairs easily with PVKIT for rail-less solar mounting
- Versatile clamp created for popular snap-together profiles, including the Firestone UC4, Peterson SnapClad™, MBCI LokSeam™ and all similar seam types
- Also used on single-folded (horizontal seams) under ≤ 0.54” (13 mm) to avoid necessity of field crimping the seam
- Developed for profiles having a T-shaped seam configuration with a horizontal dimension ≤ 1.3” (33 mm)
- Two-piece design allows clamp to be placed over the top of the T-seam at any desired location
- Fits architectural single-fold (or “angle-seam”) and horizontal single-fold seam with horizontal dimension ≤ 5/8” (15 mm)
- Our most versatile clamp
- Fits 85% of standing seam profiles manufactured in North and South America, including structural and architectural profiles
- Use on vertically-oriented seams
- Rotate clamp 90° and use on most horizontal seam profiles w/horizontal dimensions ≥ 0.65” (16.5 mm)
- Unique flange design increases ease and versatility of attachment to bottom-mount PV rails and other nut and bolt connectionsUnique flange design increases ease and versatility of attachment to bottom-mount PV rails and other nut and bolt connections
- Fits 85% of U.S. (vertical) standing seam profiles, including most snap-together and machine-folded seams
- Designed for snap-together and vertical-folded seams
- Fits the same vertically-oriented seams as the S-5-U
- Less versatile but more cost effective than the S-5-U
- Specifically designed for vertical machine-folded seams
- Specially designed to fit Zip-Rib®, BEMO, Kalzip® and similar profiles with a round “bulb” seam configuration and seam diameters of ≤ ¾” (19 mm)
- Two-piece clamp design allows for ease of installation anywhere along length of the rib
- Flange clamp specifically designed to fit bulb-shaped profiles
- Unique flange design increases ease and versatility of attachment to bottom-mount PV rails and other nut and bolt connections
